Cibiyar Samfura

Nau'in tace ruwa yana sanya ruwan (ciki har da mai, ruwa, da sauransu) tsaftace gurbataccen ruwa zuwa jihar da ake buƙata don samarwa da rayuwa, wato, don sanya ruwan ya kai wani matakin tsabta. Lokacin da ruwan ya shiga cikin abubuwan tacewa tare da takamaiman girman allo na tacewa, ana toshe ƙazantansa, kuma ruwan mai tsafta yana fita ta hanyar tacewa. Don haka menene ka'idodin masana'antu don sarrafa abubuwan tace mai na ruwa, da kuma yadda ake sarrafawa da tabbatar da ingancin abubuwan tacewa?

Matsayin Gudanarwa da Kula da Ingancin Tacewar Mai Na'ura mai ɗorewa

Hanyar sarrafa mai tace mai

1. Matakan sarrafa abubuwan tacewa sune: blanking, folding, creasing, clamping gefu, taro, bonding, and packing. Lokacin da daidaito ya yi girma, dole ne a yi gwajin kumfa, kuma ana buƙatar murmurewa na musamman ko kayan aiki.

2. Matakan sarrafawa na nau'in tacewa na rabuwa sune: yankan, nannade, matsawa, haɗuwa, haɗin gwiwa da marufi.

3. Matakan sarrafawa na nau'in tacewa na coalescing sune: blanking, winding, folding, curing, clamping gefen, taro, bonding da packing. (Ba sa bukatar a naɗe matattarar haɗakar da masana'antu)

4. Matakan sarrafawa na nau'in tacewa adsorption sune: yankan, iska, hadawa, curing, bonding da marufi.

Tace Inganci

Dangane da ingancin abubuwan tace ruwa na hydraulic, ana aiwatar da binciken farko da binciken juna (ana duba tsarin na gaba a cikin tsarin da ya gabata), kuma ba za a karɓi wanda bai cancanta ba.

1. Lokacin zazzagewa, kula da ko an zaɓi allon tallafi na kayan tace daidai, ko samfurin kayan tacewa yayi daidai da buƙatun zane, kayan tacewa yakamata su kasance marasa gurɓatawa, kuma feshin ya kamata ya zama iri ɗaya (babu lalacewa zobe).

2. Don nau'in nadawa, kula da ciki da waje na mai na kayan tacewa, kuma kula da tsayin daka da lambar nadawa. Yawan folds ya kamata ya zama ninki 1-3 fiye da zanen, tsayin nadawa iri-iri ne, layin nadawa yana da santsi, kololuwar nadawa suna layi daya, babu matattu nadawa da lalacewa ta hanyar tacewa, kuma an ba da izinin yadudduka masu tacewa. na kowane Layer suna daidaitawa a bangarorin biyu.

3. Takardar fiber na shuka yana dauke da 15% -20% resin, wanda ke buƙatar warkewa a wurin don inganta ƙarfinsa da taurinsa.

4. The clamping kayan aikin su ne lebur hanci filaye da waya sassaƙa filaye. Lokacin danne gefen, ƙarfin ya kamata ya zama iri ɗaya, kayan tacewa kada a lalace, abin da ke tattare da shi bai kamata a wargaje ba, tazarar ninki ɗin ya zama iri ɗaya, gefen matsewa ya zama tabbatacce, gefen tacewar da aka gyara. abu ya kamata ya kasance ba tare da burrs ba, kuma adadin folding folds ya kamata ya zama lambar da ake bukata a cikin zane.

5. Ana buƙatar suturar manne don zama uniform. An haramta Degumming sosai, ba a yarda da manne ya gudana sama da haɗin gwiwar cinya, kuma manne ba a yarda ya sami kumfa mai iska a cikin haɗin gwiwa. Dole ne a warke manne gaba daya. Bayan manne ya warke, tsaftace kan ragamar ƙarfe da ya wuce gona da iri.

6. Lokacin da ake hadawa, zaɓi kwarangwal, kololuwar manne ya kamata a daidaita shi tare da waldawar kwarangwal da haɗawa, cire igiyar ƙarfe da ta wuce kima, kuma kiyaye kamanninsa kyakkyawa.

7. Ƙarshen iyakoki yana buƙatar zaɓar don haɗawa. Ba a yarda a yi amfani da madafunan ƙarewa tare da mayafin da bai dace ba. Kula da ko manne ya manne ƙarshen hular kwarangwal tace abu da ƙarfi. Ya kamata a goge manne mai fita da tsafta, kuma kada a sami gurgujewa don kiyaye fuskar ƙarshen da tsaftar kayan aiki. . Bayan manne ya warke sosai, ana iya aiwatar da tsari na gaba. Bayan haɗin gwiwa, a tsaye da daidaiton nau'in tacewa dole ne su cika buƙatun zane.

8. Bincika ingancin nau'in tacewa kafin shiryawa, sa'an nan kuma zaɓi hatimi, jakunkuna, da akwatunan marufi bisa ga buƙatun zane. A lokacin aikin marufi, ba a ba da izinin lalata jakar marufi ba, kuma akwatin marufi da abin tacewa ana sanya su da kyaun rubutu mai kyau da kyau kafin a tattara su kuma a saka su cikin ajiya (a riƙa kula da kulawa yayin aiki don guje wa faɗuwa).

Matsayin masana'antar tace ruwa

JB-T 7218-2004 nau'in harsashi mai matse ruwa tace kashi

JB-T 5087-1991 Injin konewa na ciki mai tace takarda tace kashi

GBT 20080-2006 Na'urar tace ruwa

HG/T 2352-1992 Waya-rauni tace kashi don Magnetic ɓangaren litattafan almara tacewa HY/T 055-2001 Pleated cylindrical microporous membrane tace kashi

JB/T 10910-2008 Oil da gas rabuwa tace kashi na gaba ɗaya mai-alurar rotary iska compressor JB/T 7218-1994 nau'in harsashi nau'in tacewa

JB/T 9756-2004 Na ciki konewa injin iska tace takarda tace kashi