The kula daloader na baya ba a wurin ba, wanda kai tsaye ya shafi rayuwar sabis naloader na baya.Abubuwan tace iska kamar wurin bincike ne don iskar ta shigaloader na baya inji.Zata tace kazanta da barbashi, ta yadda za a tabbatar da aikin injin na yau da kullun.Wadanne matakan kariya ya kamata a ɗauka yayin tsaftacewa da maye gurbinloader na baya iska tace?

Kafin yin aiki da kula da matatar iska, dole ne a kashe injin ɗin kuma madaidaicin kulawar tsaro dole ne ya kasance a wurin kulle.Idan ana canza injin tare da tsaftacewa yayin da injin ke aiki, ƙura za ta shiga cikin injin ɗin.

Tsare-tsare don tsaftace matatar iska naloader na baya:

1. Lokacin tsaftace abubuwan tace iska, tuna kar a yi amfani da sukudireba ko wasu kayan aikin don cire murfin mahalli na tace iska ko ɓangaren tacewa, da sauransu.

2. Kada a tarwatsa abubuwan tacewa na ciki lokacin tsaftacewa, in ba haka ba kura zata shiga kuma ta haifar da matsala tare da injin.

3. Lokacin tsaftace nau'in tace iska, kar a buga ko taɓa abin tacewa da wani abu, kuma kar a bar abin tace iska a buɗe na dogon lokaci yayin tsaftacewa.

4. Bayan tsaftacewa, wajibi ne don tabbatar da matsayin amfani da kayan tacewa, gasket ko rubber sealing part of the filter element.Idan ya lalace, ba za a iya ci gaba da amfani da shi ba.

5. Bayan tsaftace nau'in tacewa, lokacin dubawa tare da fitila, idan akwai ƙananan ramuka ko ƙananan sassa a kan nau'in tacewa, ana buƙatar maye gurbin kayan tacewa.

6. A duk lokacin da aka share abubuwan tacewa, cire alamar mitar tsaftacewa na ɗan'uwa na gaba daga murfin waje na taron tace iska.

Hattara lokacin maye gurbin abubuwan tace iska naloader na baya:

Lokacin daloader na baya An tsaftace nau'in tacewa sau 6, hatimin roba ko kayan tacewa ya lalace, da dai sauransu, dole ne a maye gurbin abubuwan tace iska a cikin lokaci.Akwai abubuwa masu zuwa don kulawa lokacin maye gurbin.

1. Ka tuna cewa lokacin da za a maye gurbin na'urar tacewa ta waje, abin da ke ciki ya kamata a maye gurbinsa a lokaci guda.

2. Kada a yi amfani da gaskets da suka lalace da tace kafofin watsa labarai ko tace abubuwan da suka lalace tare da hatimin roba.

3. Ba za a iya amfani da abubuwan tacewa na karya ba, saboda tasirin tacewa da aikin rufewa ba su da kyau, kuma kura za ta lalata injin bayan shigar.

4. Lokacin da aka rufe ɓangaren tacewa na ciki ko kayan tacewa ya lalace kuma ya lalace, ya kamata a canza sababbin sassa.

5. Wajibi ne a bincika ko ɓangaren rufewa na sabon nau'in tacewa yana manne da ƙura ko tabo mai, idan akwai, yana buƙatar tsaftacewa.

6. Lokacin shigar da sinadarin tace, idan roban da ke karshen ta kumbura, ko kuma ba a tura bangaren tace waje ta mike ba, kuma aka sanya murfin da karfi a kan tarkon, akwai hadari na lalata murfin ko tacewa.

Injin yana buƙatar tsotse iska mai yawa yayin aikin aiki.Idan ba a tace iska ba, ƙurar da aka dakatar a cikin iska za ta tsotse cikin silinda, wanda zai hanzarta lalacewa na rukunin piston da silinda.Manya-manyan barbashi da ke shiga tsakanin fistan da silinda na iya haifar da “jawo silinda” mai tsanani, wanda ke da tsanani musamman a busassun wuraren aiki da yashi.Ana shigar da matattarar iska a gaban motar carburetor ko bututun ci don tace ƙura da yashi a cikin iska, tabbatar da cewa isasshiyar iska mai tsabta ta shiga cikin silinda.
Dangane da ka'idar tacewa, ana iya raba matatun iska zuwa nau'in tacewa, nau'in centrifugal, nau'in wankan mai da nau'in hadewa.
A lokacin kulawa, ba dole ba ne a tsaftace kayan tace takarda a cikin mai, in ba haka ba kayan tace takarda zai kasa, kuma yana da sauƙi don haifar da haɗari mai sauri.A lokacin kiyayewa, kawai hanyar girgiza, hanyar kawar da goga mai laushi (don gogewa tare da wrinkle) ko kuma matsewar hanyar busa iska kawai za'a iya amfani da ita don cire ƙura da datti da ke haɗe a saman ɓangaren tace takarda.Don ɓangaren tacewa, ƙurar da ke cikin ɓangaren tattara ƙurar, ruwan wukake da bututun guguwa ya kamata a cire cikin lokaci.Ko da za a iya kiyaye shi a hankali kowane lokaci, ɓangaren tace takarda ba zai iya cika ainihin aikinsa ba, kuma juriya na iska zai karu.Don haka, gabaɗaya, lokacin da ake buƙatar kiyaye ɓangaren tace takarda a karo na huɗu, yakamata a canza shi da sabon nau'in tacewa.Idan abin tace takarda ya tsage, ya fashe, ko kuma takardar tacewa da hular ƙarewa ta lalace, sai a maye gurbinsu nan take.